ABSTRACT
In present work, SEM and EDS results of porous and enriched in calcium, copper, magnesium and phosphorus coatings, which were obtained during 3-minute treatments of Plasma Electrolytic Oxidation PEO (Micro Arc Oxidation MAO) processes on CP Titanium Grade 2 at two potentials, i.e. 500 VDC and 650 VDC, are presented. It was found that the voltage of that process influences the chemical composition of coatings shapes obtained on titanium in electrolytes containing calcium, copper and magnesium nitrates. The pores shapes of PEO coatings formed on titanium in electrolytes containing calcium, copper and magnesium nitrates are presented, too. In addition, it was also noted that with using of higher voltage (here 650 VDC) of PEO treatments, the higher Ca/P, Cu/P and Mg/P ratios were found than those after treatments at 500 VDC.
References
Support the magazine and subscribe to the content
This is premium stuff. Subscribe to read the entire article.